[Top 5] Best Spindle Sander - Recommendations and Reviews

Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt

Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM

The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke

Onboard storage maintains organization of all accessories and sandpapers

Includes a beveling work table, five throat plates, four rubber sanding drums, one belt sanding attachment and six pieces of 80-grit sandpaper (one for each size spindle/belt)

Lightweight and portable design allows for easy handheld sanding in hard-to-reach places

Easily transform your portable handheld unit into a stationary benchtop spindle sander by clamping it to your workbench with the included mounting hardware

Powerful 5-Amp variable speed motor provides anywhere from 1800 to 3200 rotations and 50 to 90 oscillations per minute with a 1/4-inch stroke

Features four different sanding spindle diameters: 1/2 inch, 3/4 inch, 1 inch, and 1-1/2 inch spindles

Includes four 80-grit sanding sleeves, three rubber drums, one non-marring rubber mounting pad, Two clamps, an adjustable Straight-edge guide Plate, an onboard 1-1/2-inch dust port, and a two year warranty

Ideal for sanding contours, arcs, curves & other irregular shapes

Rotating & oscillating action for increased speed, efficiency and a precision finish

Powerful 3.5A (450W) motor No Load Speed - 2000 RPM Oscillation Speed - 58 OPM

Includes 6 sanding sleeves with matching rubber drums & table inserts

On-board storage for all accessories. Sleeve Range - 1/2 - 3 inches

1/2 Horsepower Permanent Magnet Motor, 120-Volt, Single Phase, CSA Certified

Table Size: 11-1/2-Inch W x 15-Inch L x 1-5/16 H

Sanding Drum Diameter: 3/4", 1", 1-1/2", 2" and 3"; Sanding Drum Length 4-1/2-Inch

Sanding Sleeves: 1/2", 3/4", 1", 1-1/2", 2" and 3" (1/2" sleeve fits directly on the spindle)

Weighs 30-Pound

Sold on Amazon

ACCOMMODATES BEVELING: Table tilts up to 45°.

REDUCED FRICTION HEAT: 1" oscillating action protects wood and prolongs sleeve life.

QUICK SPINDLE CHANGES: Spindles have threaded ends for fast, easy changes.

CONVENIENT STORAGE: Built-in storage racks keep spindles and table inserts nearby.

ACCIDENT PREVENTION: Removable on/off safety switch prevents accidental start-up.

1/2 HP Motor

Multiple Spindles and Inserts Included

Table Tilt 0-45° Forward

Dual Tool Holders

2″ Dust Ports

Large cast aluminum table with 0-45 degree tilting front section for flatness, accuracy and strength

Rotating and vertically oscillating sanding action for the perfect balance between work rate and control

5 x sanding sleeves (1/2" - 2" dia) and matching drums provide maximum versatility with intricate, shaped workpieces

All metal belt sander unit with easy belt change provides maximum workrate with straigh and shaped workpieces

On-board storage slots keeps accessories with the tool for rapid mode changing and convenience

Vented throat plates and under table dust channel for optimised dust and chippings extraction prociding a cleaner and safer working environment

Powerful 1/2 HP 3.5 amp motor provides 58 OPM and 2000 RPM

Features onboard storage for all accessories along with a dust collection port for hooking in a dust extractor

Attach the dust collector of your choice to the onboard dust port to minimize clean-up

Product 1: Two-in-one sanding machine includes both a 1-by-30 inch belt and a 5-inch disc

Product 1: 2.3A motor provides up to 3160 FPM for the belt and 3450 RPM for the disc

Product 1: Sturdy heavy-duty base prevents walking and wobbling during operation

Product 1: Features two separate dust ports for maximum vacuuming efficiency

Product 2: Powerful 1/2 HP 3.5 amp motor provides 58 OPM and 2000 RPM

Product 2: Features onboard storage for all accessories along with a dust collection port for hooking in a dust extractor

Product 2: Attach the dust collector of your choice to the onboard dust port to minimize clean-up