The Best Portable Belt Sander - Review and Buying Guides

Low noise (84dB) for operator comfort

4" wide belt with a speed of 1,640 ft./min. for fast material removal

Labyrinth construction seals and protects motor and bearings from dust and debris for longer tool life

Large front grip is positioned for operator comfort

Innovative design for sanding flush to wall with nose and side of sander

6.3-amp variable speed motor rotates the belt anywhere from 558 to 820 feet per minute

Compact design weighs in at a mere 6 pounds to limit user fatigue

Lock-on power switch allows for continuous sanding without requiring a constant grip on the trigger

Quick-release belt tension lever allows for fast sandpaper installation and grit changes

Includes a detachable dust bag to minimize clean-up, a 1-1/4-inch dust port, and an 80-grit sanding belt, and a two-year warranty

Versatile for use on wood, metal, and fiberglass materials

Ideal for woodworkers, artists, glaziers, welders, prefinished cabinet installers, and finish carpenters

Narrow belt and exposed front pulley for use in close quarters or on irregular shapes

Variable speed control dial (656-3,280 ft./min.) enables user to match the speed to the application

Lock-on button for continuous operation

Pressure control technology monitors sanding pad pressure applied for optimal finish

6.0 A of power sands any type of wood surface

Micro-filtration – captures and contains fine dust particles

Auto track belt alignment keeps belt centered

Vacuum compatible – fits standard 1-1/4 In. vacuum hoses.Flush edge sanding sands right up to the edge for maximum capacity

7.0 amp 3in. X 21in. Belt sander with an angled belt Design to sand closer to adjoining surfaces

Max 800 FPM For fast material removal

Tool-free belt release for quick and easy belt changes

High performance dust collection featuring onboard dust bag

3position over molded handle improves comfort during use

Compatible with the VERSATRACK Wall Organization System. Hook and accessories sold separately.

3 Year Limited Warranty, refer to "Warranty & Support" section below for full details

1/2" - 5/8" adjustable sanding belt oscillation

Conveyor speed: 16.4, 23, 32.8 FPM

Maximum board dimensions: 17-1/2" wide x 6" thick

Minimum board dimensions: 9" long x 1/8" thick

Motor: 5 HP, 220V, single-phase, 60 Hz, 1725 RPM

HIGH EFFICIENCY: This sander meets CSA standards, with heavy-duty construction can extend using life, equipped with an induction motor that supplies the needed power running under load, the motor is 1/3HP, 3.5 Amp, the no load wheel speed is 3450 RPM and belt speed 4480 FPM

MULTI-FUNCTION SANDER: This combo 2"x42" belt sander 6" bench grinder includes a 2-Inch x 42-Inch high-quality metal sanding belt that can be used for general purpose sanding and finishing on most metals, wood, plastics, and other materials

MULTI-ANGLE SANDING: The belt can tilt from 0 to 90 degrees for sanding to meet your project, the belt housing can swivel from horizontal to vertical for sanding long workpieces

EASY TO USE: Equipped with a 6-Inch 60 grit white grinding wheel with tool-free adjustable eyeshield and Led light, the quick-release tension and tracking mechanism make belt changes quick and easy

TWO WORKTABLE: Equipped with two workbenches for more convenient sanding, the cast iron belt sander work table can give better support when sharpening with metal,and the cast AL big work table can work well with wood material, the sturdy cast iron base with rubber foot prevents vibrations

Great for Spot Weld Removal

Simple belt tension lever

Variable speed control and increased pulley space for new thicker belts

Industry leading 0.5HP

Includes: 303740 -Sanding Belt 40 Grit - 1/2" x 18" 303760 - Sanding Belt 60 Grit - 1/2" x 18" 303780 - Sanding Belt 80 Grit - 1/2" x 18"

7-amp motor rotates the belt at over 13 feet per second

Compact design weighs in at a mere six pounds to limit the fatigue of the user

Includes a detachable dust bag to minimize clean-up

Lock-in safety feature allows for continuous sanding without requiring a constant grip on the trigger

Backed by a two-year warranty and a nationwide network of skilled technicians

Upgraded 3/4HP Powerful Motor: Unlike other belt sanders of the same type in the market which only have a 1/2 HP motor, our benchtop belt sander use a 3/4 HP high power motor that provides up to 3600 rpm and 1800 fpm

Adjustable Sanding Belt: 2-in-1 belt disc sander includes both a 4×36" belt and a 6×6" disc. Position Adjustable Sanding Belt from 0-90 degrees,tilt the bench sander belt from horizontal to vertical position depending on the needs of your project. Adjustable work table 0-45 degrees with the miter gauge

Double Dust Exhaust Port and Double Safety Switch: this belt sanders for woodworking has 2 dust exhaust ports, disc and belt separate dust exhaust. Removing the safety lock when not in use ensures safety. Sturdy cast iron base to prevent heavy vibration.

Long Belt Life: multi wedge belt drive mechanism extend the belt’s use life, high speed, high sanding efficiency. The table sander belt tension adjustment device prevents the belt from losing. A transparent PC guard helps users easily checking the condition of the belt

Easily Belt Replacement and Tracking: firstly loose bench belt sander one screw to remove the dust exhaust, then pull the tension lever, release the tension for replacement. Fast track the belt to keep it running in the middle

Warranty: Woodskil always puts quality and customer satisfaction at the core, we will provide 2 years warranty, if you have any question, please feel free to contact us! Tip：for your safety and smarter use of this product, please read the manul carefully before use, and be sure to keep the manul.