Top 5 Best Hybrid Table Saws Reviews

SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.

UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. Poly v-ribbed belts reduce vibration and help ensure a great cut. Table flatness is measured diagonally at 0. 010” maximum gap.

RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe.

CONFIGURABILITY: Over 150 unique configurations, makes the Contractor Saw the most configurable SawStop saw. Adding a mobile base, sliding crosscut table or router table, are just a few of the ways to make this your ideal saw.

UNIVERSAL PERFORMANCE: The Contractor Saw offers versatility, reliability and safety for a variety of users. The cast iron table top (Cast Iron Wing Assembly, CNS-CIWA, sold separately) creates a better-than-hybrid performance in the shop at an affordable price.

36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection.

2 HP, 120V/240V, single-phase motor prewired to run on a 120V, 20A circuit

Enclosed cabinet bottom with 4" dust port

Precision-ground cast iron table with steel wings measures 401/4" x 27"

Rip capacity: 30" to right, 15" to left

Lift-off fence with front/rear locking ability

Ships in two boxes

Shipping information: 2 Packages

36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection.

SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.

UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0. 010” maximum gap.

DUST COLLECTION: 99% dust collection is delivered above the table with the included dust collection blade guard, and below the table with advanced shrouding around the blade. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade and into the 4” port.

RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe.

Precision-ground cast iron table and extension wings

Cast iron trunnions

Easy-glide fence system

Quick-release blade guard & riving knife

4" Dust port

IF ANY COMPONENT IS MISSING FROM YOUR ORDER PLEASE ACCEPT THE SHIPMENT AND CONTACT AMAZON. DO NOT RETURN THE ENTIRE UNIT BECAUSE OF A MISSING PART. WE WILL EXPIDITE THE DELIVERY OF ANY MISSING COMPONENT. THANK YOU

THIS ITEM SHIPS IN 2 BOXES. YOU SHOULD RECEIVE THE FOLLOWING COMPONENTS - 36-5100 Tables Saw Body 36-T31 30" Rails

Powerful 15 Amp Contractor Grade motor easily handles hardwoods

30 Inch Rip Capacity handles large stock and 13/16 in. X 8 in. STACKED DADO CAPACITY

Legendary Biesmeyer Fence Accurate to 1/64”

Smooth and dependable adjustable belt drive table saw

13/16 in. X 8 in. STACKED DADO CAPACITY

Cast iron table top with 2 steel extension wings. Speed- 3,450 RPM

Heavy duty one piece rail system for precision cuts every time

Your purchase includes one Dewalt table saw, 10inch 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual

Other Specs: Max rip to left of blade – 22inch | Max rip to right of blade – 32-1/2inch | Max width of Dado – 13/16inch | Arbor size – 5/8inch | Amps – 15 | Depth of cut at 45inch – 2-1/4inch | Depth of cut at 90° – 3-1/8inch | No Load Speed: 4800 RPM

Rolling stand designed for easy set up and breakdown with excellent stability

Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate

Features a 15.0A high torque motor with the power to cut pressure treated lumber and hardwoods

Legendary worm drive gearing offers maximum torque for ripping applications

Precision rack and pinion system makes fence adjustments quickly and smoothly for accurate cuts

Light weight and compact footprint make it easy to move around the jobsite

Tear through sheet goods and slice up to 3x with the 2-5/8 inch depth of cut and 25 inch rip capacity

All-metal construction delivers legendary durability

Includes 10" x 40T carbide-tipped blade

Die-cast aluminum table insert

Quick blade elevation adjustment

4" outfeed extension support

Integrated accessory storage

Motor: 2 HP, 115V/230V (prewired 115V), single-phase, 16A/8A

Rip capacity: 31-1/2" right, 11-3/8" left of blade

Max depth of cut at 90 degrees: 3-1/8"

Max depth of cut at 45 degrees: 2-1/8"

Table Size: 40-1/8" x 27"

Distance from front of table to center of blade: 16-1/4"

Floor-to-table height: 34-1/4"

Arbor diameter: 5/8"

Arbor speed: 4000 RPM

Max width of dado: 13/16"

All sealed ball bearing construction Serpentine drive belt Powder coated paint Quick change between riving knife & splitter guard Base dimension: 20-1/2" x 20-1/2" Approx shipping weight: 623 lbs.